Gen Ford RS alloys x4, 7"x15", offset ET28, 4stud, three wheels diamond cut and lacquered then never used, one still needs refurb, 4 new c/caps with locking key, 4 new valves. Minor alli corrosion under the lacquer on two wheels which is very common on diamond cut alloys even if they haven't been used just stored as these have. Close up pics of all 4 wheels available on request by e-mail. One centre cap is still in the packet sealed up. Suit Fiesta 3, Puma, and many rear wheel drive Fords £125 the 4 wheels with no tyres. These were not standard on any Ford as far as we know - they were in the FORD RS Accessory catalogue.
NEW WHEELNUTS WHEELSTUDS AND WHEELSPACERS FOR CORTINA Mk1 Mk2 Mk3 Mk4 Mk5 - we will supply suitable wheelnuts from £1.00 per nut in M12x1.5 thread (Mk3/4/5 Cortina) or 7/16"unf (MK1+2 Cortinas) from taper seat chromed nuts, closed or open ended, or sleeve nuts to suit steel (Lotus steels, Wellers, standard steels, Appliance chromes, Rostyle 4-spoke steels) or alloy wheels such as Wolfrace, Revolution, FORD RS alloys, Dunlop D1, Cosmic, JAP and some Compomotives etc- also supply spacers and spacer kits and longer wheelstuds, spacers from 3mm to 32mm, studs from 43mm long in 7/16"unf and from 47mm long in M12x1.5 thread - studs all £1.50 inc VAT Each, spacers from £7.50 inc VAT per pair for 3mm thick - just call us or e-mail us with your requirement. See our wheelnuts page for more info - click here : www.speedshack.co.uk/wheelnuts.htm
From £1 per nut
From £7.50 per pair spacers
HALF CHROMED 1600E Mk2 CORTINA ROSTYLE WHEELS - VERY RECENTLY RE-CHROMED - SET OF 5 - Centre caps also re-chromed, come fitted with 4 Firestone F-560 175-13 tyres maybe a quarter worn if that . Also includes 5 stainless steel deep dish trim rings / embellishers although there are a few scratches on these. The central chromed area on these wheels is as new. Detailed photos available on request. Removed from a show car that had just been fitted with Minilites. Price will include 16 brand new chromed closed end wheelnuts.
Mk2 Cortina GT 3-spoke polished original FORD steering wheel with adaptor boss and centre cap. Black leather. Leather not perfect could do with a re-cover but quite use-able as it is.
Mk2 Cortina 1600E Series 2 semi-chromed ROSTYLE original steel wheel 5.5x13, fitted with 175/70/13 tyre but tyre is flat. Unchromed painted part of wheel could use re-paint, no centre cap. Photo available on request.
CORTINA Mk3 GT/GXL steel wheel centre caps - polished stainless steel original FORD item - NOW SOLD - SORRY
CAPRI LASER RS 4-Spoke 6"x13" alloys - 2 odd wheels only on stock - fit perfectly and look great on most Cortina models
and 185-70-13 part-worn and new tyres from £10 each - fitting available.
BODY + INTERIOR
PARTS INCLUDING SPOILERS + LIGHTING
Mk2 Cortina bonnet hinges - 1 pair - been shot blasted ready for paint
BACK SEAT for Cortina 1600E Mk2 - no rips or tears, black
Mk2 Cortina 4-door kick plates / alli door sill plates - set of 4 original FORD - good used - photo avail on request
Mk2 Cortina front indicator units complete with very good indicator lenses
Mk2 Cortina rear light alloy bezel - fits around rear light unit - VERY straight and clean - drivers side - photo available
Mk2 Cortina rear light lenses - various in stock second hand - indicator lenses and stop lenses - £5 to £15 each
1600E Series 2 Cortina Wood dash facia - needs re-varnishing otherwise good
1600 GT Mk2 Cortina dash auxillary gauges - original FORD gauges - superb chromed bezels, set of 4, photo available
Mk2 Cortina front grille, with both spotlamps but glass / lens missing on 1 lamp.
1600E Mk2 Cortina Rev counter, the standard FORD gauge - used.- 7000 RPM
Mk2 Cortina alloy trim strips - the full width 2 piece strip that runs along the back of the car just under the bootlid lip - no damage
MOUNTNEY Steering wheel adaptor boss for MK1 Escort + Capri / Anglia / Cortina Mk2 to fit Mountney M Range steering wheels also MOMO / SPARCO etc - NEW - Part no. M1026X - includes allen key screws and allen key.
CORTINA Mk2 Front bumper, this is a NEW OLD STOCK genuine FORD item.
CORTINA Mk5 n/s/r bumper end cap - new old stock - not genuine FORD
Cortina Mk1 2-door rear side glass, original, good condition
EXCLUSIVE PRODUCT : CORTINA MK2 CLEAR REAR INDICATOR LENSES - DIRECT REPLACEMENT FOR ORIGINALS - REQUIRE AMBER INDICATOR BULBS (ADD £2.99 A PAIR WHEN BOUGHT WITH LENSES) - SHOW USE ONLY ! Click photo for bigger image. ALSO AVAILABLE - BRAND NEW Mk2 CORTINA AMBER INDICATOR LENSES and BRAND NEW RED STOP LENSES STILL AVAILABLE AT £44.95 a pair inc VAT
left - n/side
CORTINA Mk1 PARTS :
Cortina Mk1 GT alloy inlet manifold to suit twin choke Weber, original FORD / FOMOCO - 1 stud missing but thread is OK £ SOLD
REAR BUMPER with over-riders.
VERY straight, some pitting on chrome, acceptable
when polished up, with mounting irons.
Nearside front airflow indicator lens, internal cracks but quite useable £5 Airflow alloy indicator surrounds / bezels £10 eac , flow indicator to body rubber seal / gasket - good used £5
ALSO : Toughened rear screen £35 Glovebox lid (Pre-airflow - grey painted) £10,
'C' pillar cream vinyl trims £5each,
rear interior side
panels - red vinyl for 2-door £25pr Sealed beam headlamps + back bowls £30pr,
Wiper arms £15 pair Front
screen stainless steel insert - good £20
Bootlid - rust along bottom edge but repairable £20
Mk2 Cortina offside front indicator unit with lens, fitted to the alloy headlamp bezel, lens etc good, bezel has a few dinks-
Mk2 Cortina n/side indicator lens / unit with alloy backing, superb, no cracks at all.
Mk2 Cortina C-Pillar outside air vent / cover, drivers side
Mk2 Cortina Bootlids - red (has round key type security lock fitted with no key!!)
Mk2 Cortina Rear screen,
Mk2 Cortina front windscreen, with really good original rubber and chromed rubber insert. original Triplex / Fomoco
Mk2 Cortina Front screen,
has some scratches need polishing out. Toughened.
Mk2 Cortina 1600E Rear
bumper. VERY straight although chrome not A1. Very respectable,
Cortina Mk3 Doors available from a 4 door model 2000E, metallic dark brown. Pics available.
Cast exhaust manifolds
for 2.3 / 2.8 v6 - believed Cortina 2.3 but could be
Granada Mk2. Photos available on request. Part no 's
79TF9430EC and 79TF9431HI
CORTINA Mk3 2000E
oblong headlamps, no rusty reflectors !
MK1 FRONT GRILLES (AIR FLOW MODEL) PAINTED BLACK, VERY
STRAIGHT, ONLY 2 IN STOCK
CORTINA Mk2 '1600E'
wing / boot badge, 2 pin fixing, not perfect but useable
CROSSFLOW KENT FAST ROAD CAMSHAFT - PART No. A2 - Around 500 miles only use. Photo and close up pics available on request. 3000-7000rpm power band, valve lift 0.349" / 0.347", duration 286 degrees. Cost new around £150 or more. Asking £75.00. Will require NEW cam followers.
WEBER TWIN CHOKE CARBURETTOR 32DFM as fitted to 1600GT and 1600E Mk2 Cortina models. Manual choke, nothing missing, spindles operate smoothly. Used. Photo avail on request, manifold available separately if required.
1600E + GT Mk2 Cortina standard FORD 4-2-1 tubular exhaust manifold - good used condition undamaged but could do with a shot blast - flanges OK and joining nuts / bolts included as shown in piccy
LOTUS CORTINA CRANKSHAFT - this is an early 4-bolt flywheel version, 125E part number, with cam chain sprocket fitted, could use a regrind purely due to wear not any kind of seizure or breakage. Journal sizes can be measured just e-mail me at firstname.lastname@example.org
1600E Mk2 Cortina standard original air filter box - steel, good and complete
Mk2 Cortina outer track rod ends - NEW old stock
Mk2 Cortina steering idler arms - NEW old stock
Mk2 Cortina front anti roll bar - 19mm, good used with anti roll bar to chassis rubbers.
Mk2 Cortina 1600E front disc back plates / stone guards - good used.
Mk2 Cortina KYB gas rear shock absorbers, perfect working order but body of shocks have silver overspray but that's easily sorted.
Mk2 Cortina 1600E front brake calipers, good working order, with good pads, only recently removed to do a vented disc conversion.
BRAND NEW - CORTINA Mk3/4/5 UPRATED and LOWERED SPRINGS - 2" lowered - NOT for Estate models - note - on a Mk5 will make the rear 1/2" lower than on Mk3 + 4 models - can be made to how low you want them for this price, allow 2 weeks for delivery as they are custom made.
set custom made to order inc delivery
Mk2 Cortina clutch master cylinder to slave cylinder red plastic pipe with both unions fitted, good used, fitted to a seized clutch cylinder
Mk1 Cortina original steel rocker cover with oil filler cap / breather, no dents, could do with re-painting
Mk2 Cortina std 4-speed later type gearbox, gearstick position at very back of alloy tailshaft housing type, with steel bellhousing, no clutch fork or gearstick, was a good spare box then dry stored for a number of years. We have taken off the inspection cover on this box, no broken gears or water contamination. All gears select smoothly off the car. Although we cannot test off the car for noisy bearings etc it looks like a good useable box. Clutch slave cylinder fitted but unknown condition, no pushrod. NO POSTAGE AVAILABLE ON GEARBOXES.
CORTINA Mk2 1600E / GT original alloy inlet manifold for twin choke
Weber 691F9425AA - 1 thread needs repairing
CORTINA Mk3/4/5 steering column to steering rack coupling - good joints with no play and rubber disc not perished in the slightest. Good second hand
CORTINA Mk1, Mk2, Mk3, Mk4, Mk5 FLO-FLEX POLYURETHANE SUSPENSION BUSH KITS AVAILABLE FROM SPEEDSHACK - ALSO KITS AND INDIVIDUAL BUSHES BY SUPERFLEX and POWERFLEX ALSO AVAILABLE - Please e-mail or phone for prices - example Flo-Flex CORTINA Mk5 FRONT KIT £48.00 inc VAT
Crossflow Oil pump, for early engines with non-spin-on type filter i.e. early twin cams etc. Has a sandwich plate fitted with push-on fittings for an oil cooler. Genuine FORD, part no. 105E-6604-B. May have originally been from a Cortina Mk1 or 2 Lotus twin cam.
OHC models TOP RADIATOR HOSE by QH - Brand
New, 1 only
ANGLIA USED PARTS
NEW WHEELNUTS WHEELSTUDS AND WHEELSPACERS FOR ANGLIA 105E / 107E - we will supply suitable wheelnuts from £1.00 per nut in more modern M12x1.5 thread or the original 7/16"unf thread from taper seat chromed or zinc plated nuts, closed or open ended, or sleeve nuts to suit steel (Lotus steels, Wellers, Rostyles, Appliance chromes, standard steels etc) or alloy wheels such as Wolfrace, Alleycat, Cobra, Revolution, FORD RS alloys, Dunlop D1, Cosmic and some Compomotives etc- we also supply spacers and spacer kits and longer wheelstuds, spacers from 3mm to 32mm, studs from 43mm long in 7/16"unf and from 47mm long in M12x1.5 thread - studs all £1.50 inc VAT Each, spacers from £7.50 inc VAT per pair for 3mm thick - just call us or e-mail us with your requirement. See our wheelnuts page for more info - click here : www.speedshack.co.uk/wheelnuts.htm
From £1 per nut
From £7.50 per pair spacers
CLEAR REAR INDICATOR LENSES for 105E Anglia - NO LONGER AVAILABLE NEW - SORRY
105E Anglia DOORS - Small selection in stock, 3 passenger doors and 1 drivers door, mostly with glass and quarter glass etc
105E Anglia BONNETS - 3 in stock, all steel panels, 1 with vents cut out in front edge and Dzus fasteners fitted, other 2 completely standard, 1 maroon, 1 light blue.
105E Anglia Rear lights complete incl. lenses
105E Anglia Drivers side rear quarter panel cut off car, matt black
GRANADA Mk1-3 USED PARTS
NEW WHEELNUTS WHEELSTUDS AND WHEELSPACERS FOR GRANADAS of all year models from Mk1 to Scorpio - we will supply suitable wheelnuts from £1.00 per nut in M12x1.5 thread from taper seat chromed or zinc plated nuts, closed or open ended, or sleeve nuts to suit steel ( Wellers, Appliance chromes, L and GL wheels, standard steels etc) or alloy wheels such as FORD GHIA ALLOYS, Wolfrace, Alleycat, Cobra, Revolution, FORD RS alloys, and some Compomotives etc- we also supply spacers and spacer kits and longer wheelstuds, spacers from 3mm to 32mm, studs from 47mm long in M12x1.5 thread - studs all £1.50 inc VAT Each, spacers from £7.50 inc VAT per pair for 3mm thick - just call us or e-mail us with your requirement. See our wheelnuts page for more info - click here : www.speedshack.co.uk/wheelnuts.htm
Nuts from £1 each
Spacers from £7.50 per pair inc VAT
Mk1 GRANADA GHIA FRONT GRILLE, original FORD cast alloy grille with chrome U-Shaped surround. Very heavy ! Lovely condition. Rare
have many other parts not listed on this site,
A t present, we only have the resources it
takes to reply to some of the Sales & Technical
enquiries we are now receiving, and have been forced to try and
cut down the time spent replying to e-mails, at the same time we
do not wish to give some customers the impression we are ignoring
their e-mails or not giving the technical advice requested.
You may often get a quicker response if you call us by phone. If
this applies in your case, please call us between 10am
& 7pm on 01895 449066 and we will normally be most
happy to help with the information you require or your sales enquiry.
We apologise for having to do this. Please only e-mail us IF there is no other option. Sorry and thanks in advance for your